SUPERIOR HEARING PROTECTION
Anytime hearing protection is removed, even for a short period of time, the ear is exposed to damaging noise. Noise exposure is cumulative. Exposure to damaging noise levels, for short periods of time, creates a cumulative effects as if the ear was exposed fro the sum of those brief periods. Removing hearing protection for communication or other reasons creates this cumulative effect. Don’t risk noise induced hearing loss. Wear dB Blockers™ for maximum hearing protection.
![]() View Larger |
dB Blocker™ Classic Non-VentedNo. 10021 The highest degree of protection in all frequencies. Should also be used where high air movement would create wind noise in the vent.
|
![]() View Larger |
dB Blocker™ Classic VentedNo. 10003 A vented and filtered protector for situations where interpersonal conversation in noise is required.
|
![]() View Larger |
dB Blocker™ Classic Intercanal Non-VentedNo. 10083 Solid Intercanals were designed for persons who work in and out of noise. They are ideal for executives and supervisors who visit the factory floor infrequently and do not need to communicate while in a noisy workplace.
|
![]() View Larger |
dB Blocker™ Classic Intercanal VentedNo. 10070 Vented Intercanals were designed for persons who need to converse and work in and out of noise. Enhances communications with other workers in a noisy workplace.
|
![]() View Larger |
dB Blocker™ Grip Non-VentedNo. 10036 The highest degree of protection in all frequencies designed to be easily inserted and removed with larger hands. The protector stays clean because hands never need to touch it. The cord removes for safety around machinery.
|
![]() View Larger |
dB Blocker™ Grip VentedNo. 10018 Designed to be easily inserted and removed with larger hands. The cord removes for safety around machinery while the vented protector is better where conversation in noise is required.
|
![]() View Larger |
dB Blocker™ Grip Intercanal Non-VentedNo. 10093 Designed for persons who work in and out of noise. Ideal for those who visit the factory floor infrequently and do not need to communicate while in a noisy workplace. The GRIP keeps the protector clean and allows those with larger hands to insert more easily.
|
![]() View Larger |
dB Blocker™ Grip Intercanal VentedNo. 10080 Keep the protector clean by using the easy GRIP to install or remove. They are designed for persons who work in and out of noise. Easy to insert for those with larger hands. It enhances communication with other workers in a noisy workplace.
|
![]() View Larger |
dB Blocker™ Convertible Non-VentedNo. 10026 Offers the same protection as the Classic Non-Vented, but has a removable cord. It is particularly suited for industrial applications where there is high air movement (wind noise) which may cause a whistle in the vent.
|
![]() View Larger |
dB Blocker™ Convertible VentedNo. 10008 Offers the convenience of a detachable cord and a filtered vent for interpersonal communication. Attaches easily to various radio cords for seamless integration wtih radios.
|
![]() View Larger |
dB Blocker™ Convertible-Y Vented (single)No. 10039 Your radio connects directly to this earpiece eliminating missed calls. The additional Y vent lets you hear people and things around you while connected to your radio. |
![]() View Larger |
dB Blocker™ Communicate Ear™ (single)no. 12006 Allows in-ear, 2-way radio reception as well as exceptional hearing protection. Y vented for environmental sounds and radio clarity. Can be connected by a cord to the other dB Blocker™ in the other ear. |
![]() View Larger |
dB Blocker™ CPA (single)No. 12006 - 12008 The Industrial Cell Phone Adaptor provides hearing protection and interpersonal communication. It also connects to hands-free cell phone headsets.
|
![]() View Larger |
dB Blocker™ CaBoom Earpiece Only (single)No. 12010 Earpiece - No. 80050 Headset When combined with the corded CaBoom, this custom earpiece allows you to hear and communicate with your caller clearly without surrounding sounds invading your conversation. |
![]() View Larger |
dB Blocker™ Discreet Non-VentedNo. 11006 Solves one of the most important health issues facing many people today – lack of deep, uninterrupted sleep. Specially designed to be comfortable in any sleeping position. Phosphorescent, so they glow in the dark.
|
![]() View Larger |
dB Blocker™ Discreet VentedNo. 11005 Discreet hearing protection where conversation is also required. Used in hospitality and air travel where noise is an issue.
|
![]() View Larger |
dB Blocker™ SwimmersNo. 11007 Designed for individuals who should not get water in their ears. They are made from a special formula of silicones, custom blended to allow them to float. Note: This is not a hearing protector. |
![]() View Larger |
dB Blocker™ Sweet Tones Musicians EarpiecesNo. 11001 – 11004 Reduces all frequencies equally by 9 dB, 15 dB, 20 dB or 25 dB with corresponding Flat Attenuation Filters. Designed for musicians who want to hear sound without distortion but with less volume. |
![]() View Larger |
dB Blocker™ ER 6 & ER6i Custom EarpiecesER6 - No. 13010, ER6i - No. 13011 Designed to be worn with ER6 or ER6i in-the-ear, high-fidelity earphones. When combined with custom dB Blocker earpieces, they provide 20 dB of external noise exclusion. We can supply the earphones as well as the earpieces. |
![]() View Larger |
dB Blocker™ Shure E1, E2, E3, E4, E5, SE110, SE210, SE310 and SE530 Custom Earpieces onlyNo. 13004, 13013 – 13016, 80061 Designed to be worn with Shure in-the-ear, high fidelity earphones. When combined with custom dB Blocker™ earpieces, they provide 20 dB of external nouse exclusion. We can supply SE210 earphones. |
![]() View Larger |
dB Blocker™ DualComNo. 12033 , 80024, 80026 Allows the wearer to hear incoming audio in both ears. It has a 3.5mm stereo jack with separate right and left channels suitable for use with radios equipped with stereo and some monaural jacks. As well, the headset can be used with digital music players (iPod compatible). Designed to be worn with Convertible Y vented earpieces, DualCom can be worn under helmets of all types. |
![]() View Larger |
dB Blocker™ Pilot BarNo. 12012 Designed to be worn in the cockpit of an airplane. This lightweight, comfortable, soft molded earpiece eliminates the need for uncomfortable headbands. Custom filtered to block damaging noise and allow communication. |
![]() View Larger |
dB Blocker™ Custom Autoracing EarpiecesNo. 13005 Lightweight comfortable soft molded ear pieces integrate with communication headsets. |
![]() View Larger |
dB Life™ Sleepers – VentedNo. 11016 Discreet hearing protection where conversation is also required. Used in hospitality and air travel where noise is an issue.
|
![]() View Larger |
dB Life™ Sleepers – Non-VentedNo. 11017 Solves one of the most important health issues facing many people today – lack of deep, uninterrupted sleep. Specially designed to be comfortable in any sleeping position. Phosphorescent, so they glow in the dark.
|
![]() View Larger |
dB Life™ SwimmerNo. 11007 Designed for individuals who should not get water in their ears. They are made from a special formula of silicones, custom blended to allow them to float. Note: This is not a hearing protector. |
![]() View Larger |
dB Life™ ER 6 & ER6i Custom EarpiecesNo. 13010, 80059 - No. 13011, 80060 Designed to be worn with ER6 or ER6i in-the-ear, high-fidelity earphones. When combined with custom dB Blocker earpieces, they provide 20 dB of external noise exclusion. We can supply the earphones as well as the earpieces. |
![]() View Larger |
dB Life™ Sweet Tones Musicians EarpiecesNo. 11001 - 11004 Reduces all frequencies equally by 9 dB, 15 dB, 20 dB or 25 dB with corresponding Flat Attenuation Filters. Designed for musicians who want to hear sound without distortion but with less volume. |
![]() View Larger |
dB Life™ CPA – Cell Phone AdapterNo. 12006 - 12008 Industrial - No. 13006 - 13008 Standard Provides hearing protection and interpersonal communication. It also connects to hands-free cell phone headsets.
|
![]() View Larger |
dB Life™ All Sport – Earpiece and HeadsetNo. 13012, 80024 - 80026 Designed to be worn under a helmet. ALLSPORT™offers the noise isolation and comfort of the dB Life™custom hearing protector and high fidelity stereo sound from your digital music player (iPod compatible) or bike sound system. |
![]() View Larger |
dB Life™ CaBoom Headset and EarpieceNo. 12010, 80055 When combined with the corded CaBoom headset, allows you to hear and communicate with your caller clearly without surrounding sounds invading your conversation. |
![]() View Larger |
PhoneBuddy™PhoneBuddy™ I PhoneBuddy™ II PhoneBuddy™ I is the single version headphone for monaural use (phone calls and to just hear the phone ring in noise). You can connect your PhoneBuddy™ into your dB Blocker Convertible vented protector and hear the phone ring in noise. PhoneBuddy™ II – is the stereo version. With PhoneBuddy™ II you can listen to music and answer your phone calls on most smart phones. II also connects to dB Blocker Convertible vented protectors for use in a noisy work environment. |
![]() View Larger |
dB Com™ Shoulder Speaker MicrophoneNo. 80000, 80002, 80003, 80004, 80005, 80006 Has a jack that allows incoming audio to be transmitted to a speaker button on a Communicate Ear dB Blocker™ or through our UltraLite to a Convertible dB Blocker™ or Filtered Covert earpiece. This Microphone has a pigtail specific to each radio. Radio make and model are necessary in order to supply the correct microphone. |
![]() View Larger |
dB Com™ UltraliteNo. 80011 - 80013, Communicate Ear™ No. 12001, Convertible-Y Vented No. 10037 Is an excellent product to take radio communication directly to the ear. This minute over-the-ear communication cord set provides clear, reliable sound. It optimizes discretion for surveillance while maximizing clarity. Ideal for moderate noise situations where rugged, reliable communications are required. UltraLite is highly recommended for General Policing, Security, Emergency Response Teams, light industrial applications, and anywhere dependable response is necessary between communicators. Connects with either a 2.5mm or 3.5mm right angle jack into a speaker microphone or radio output jack. Uses either a Filtered Covert or the Convertible-Y Vented earpiece below. Length 22″ relaxed and 32″ extended. Moderate noise is noise below 100dB. |
![]() View Larger |
dB Com™ Filtered Covert Earpiece A patented filtered communication earpiece that secures a 2-way radio speaker in your ear. The wearer can hear the radio and what is going on around them. The Filterd Covert earpiece has a proprietary volume-limiting filter to prevent noise overexposure and eventual hearing loss. Its clear color makes the Filtered Covert earpiece barely noticeable and its construction makes it virtually indestructible.
|
![]() View Larger |
dB Com™ Convertible-Y Vented EarpieceNo. 10037 Your radio connects directly to this earpiece eliminating missed calls. The additional Y vent lets you hear people and things around you while connected to your radio. Convertible-Y Vented when combined with the Ultralite, allows wearer to hear 2-way radio communication in noisy environments. |
![]() View Larger |
dB Com™ Receiver ButtonNo. 80054 Transmits the incoming audio from a 2-way radio to a Communicate Ear dB Blocker™ earpiece via an interface cord. |
![]() View Larger |
dB Com™ Interface CordNo. 80027 - 80031, 80037 Used to connect between the Receiver Button and the output jack on the Shoulder Speaker Microphone or directly to the 2-way radio. These cables are Kevlar lined for exceptional tear strength, and Hytrel coated for abrasion resistance to keep them flexible down to -20C (-4F). This cable can be short (15″ relaxed or 30-32″ stretched) for Shoulder Mounted Microphone connections, or long (19″ relaxed or 50-50″ stretched) for connecting directly to a radio output jack. They are available with either 2.5mm or 3.5mm R/A or 3.5mm threaded jacks (for Motorola HT1000 radios). Color: Black |
![]() View Larger |
dB Com™ Mono “Y” Interface CordNo. 80032 - 80033 Connects radio output to two speaker buttons, one in each ear. Hytrel covered and Kevlar lined, length relaxed is 18″ and 40″ extended. Available for both 2.5mm and 3.5mm jacks. Please provide jack port size. |
![]() View Larger |
dB Com™ Communicate Ear™ EarpieceNo. 12001 Allows in-ear, 2-way radio reception as well as exceptional hearing protection. Y vented for environmental sounds and radio clarity. Can be connected by a cord to the other dB Blocker™ in the other ear. |
![]() View Larger |
dB Com™ X-Treme HeadsetNo. 80007 - 80009 For 2-way radio communication in high noise environments. It has a 19dB noise-canceling Boom Microphone that decreases background noise to clarify outgoing communication in noise. When used with “Y” Vented Convertible dB Blockers™, incoming communication is clear and distinguishable. This headset reduces mistakes in communication and the need to repeat messages, which means no time is lost retransmitting, and workplace stress is reduced. Comes with an in-line Push To Talk (PTT) switch or can be ordered for a remote PTT switch for almost hands free operation. The X-Treme Headset uses the Convertible-Y Vented earpieces (No. 10037) to connect the headset to the ear. |
![]() View Larger |
dB Com™ Palm MicrophoneNo. 80014 - 80020 Discreet handheld microphone for use in standard radio communication or surveillance with 2-way radio. Can be used with any Covert earpiece for surveillance or a Convertible-Y Vented earpiece or a Communicate Ear™ in noise. We can fit almost any radio with a Palm Microphone; we just need to know the make and model of the radio so we can choose your connector. The Palm Microphone has a jack that allows incoming audio to be transmitted to either a speaker button on a Communicate Ear™ or through our Ultralite to either a Filtered Covert or Convertible-Y Vented earpiece. Palm Microphone No. 80014 – 80020 |
![]() View Larger |
dB Com™ Earphone Kit (Intrinsically Safe)No. 80022 This kit is safe to use in hazardous areas that may contain combustible fuel in the atmosphere (gasses, vapors or combustible dust). This device is incapable of releasing sufficient electrical or thermal energy to ignite the fuel and cause fire or explosion. The kit contains a Receiver Button, Cord with a 2.5mm R/A plug, a Sound Tube and a connector for a Communicate Ear™ earpiece. Must be used with an I/S Shoulder Speaker Microphone. |
![]() View Larger |
dB Com™ X-Treme Headset (Intrinsically Safe)No. 80062 For I/S 2-way radio communication (see X-Treme Headset for features). Currently available for Motorola HT 750 radios, Com, Kenwood and M/A Comm radios (specific models only). |
![]() View Larger |
dB Com™ Shoulder Speaker Microphone (Intrinsically Safe)No. 80001, 80005 These shoulder mounted speaker microphones will take the input and output audio from the radio to the shoulder. The key on the microphone functions as the Push To Talk (PTT) switch. We can then connect the Earphone Kit (No. 80022) to the jack on the microphone to take incoming audio directly to the Communicate Ear™ earpiece. We will need your I/S radio make and model number to match the microphone to it. Currently available for Motorola HT 750 and HT1000/1250 radios. |
![]() View Larger |
dB Com™ M140 HeadsetNo. 80057 Noise-canceling headset for cell phone use. Headset is the best and most affordable noise-canceling headset we’ve found. Connects to most cell phones via a 2.5mm right-angled pin. Combines with a dB Blocker™ Cell Phone Adapter (CPA) earpiece. CPA No. 13006 |
![]() View Larger |
dB Com™ IDEN Palm Microphone HeadsetNo. 80021 Discreet hand-held microphone for use with an IDEN cellular radio. Can be used with a Filtered Covert earpiece for surveillance or a Convertible-Y Vented earpiece in noise. Most current IDEN phones have a 4-segment 2.5mm right angle connector which plugs into a jack on the phone. Older IDEN phones have a proprietary connector on the bottom of the phone. We will need to know the model number of your IDEN phone to provide the correct Palm Microphone Kit. The Palm Microphone has a jack that allows incoming audio to be transmitted through a Sound Tube to either a Filtered Covert or Convertible-Y Vented earpiece. Convertible-Y Vented earpiece No. 10037 |
![]() View Larger |
dB Com™ CaBoom HeadsetNo. 80055 Is the lightest effective noise rejecting cell phone headset we have ever seen (see above for more detail about this item). CaBoom can work with some IDEN radios. It plugs into the headset jack and moves incoming and outgoing audio to the headset. Please note: CaBoom does not contain a flash button, and using the headset in this way does require the user to start and end the call from the handset. CaBoom Earpiece No. 12010 |
![]() View Larger |
dB Com™ DualCom HeadsetsNo. 80024, 80026 Allows the wearer to hear incoming audio in both ears. It has a 3.5mm stereo jack with separate right and left channels suitable for use with radios equipped with stereo and some monaural jacks. As well, the headset can be used with digital music players (iPod compatible). Designed to be worn with Convertible-Y Vented earpieces. DualCom can be worn under helmets of all types. DualCom Earpiece No. 12033 |






































































